Shark (Amazon Returned) US Only

Shark (Amazon Returned) US Only

$299.00

$700.00

Notice: These Lotmaxx SC-10 Shark 3D printers are returned from the US Amazon store. So these 3D printers only sold in the United States.Some machines work normally. Some machines cannot...

  • Brand: LOTMAXX
  • Availability: In Stock
  • SKU:
Edition
Color
Space Gray
Blue

Notice:


These Lotmaxx SC-10 Shark 3D printers are returned from the US Amazon store. So these 3D printers only sold in the United States.
Some machines work normally. Some machines cannot work or are damaged. Therefore, we will send replacement parts to you until the machine works normally. Please send an email to kp@lotmaxx.com for more information.

In addition to the above, lotmaxx also give a gift package for your order, including the following:

Part No. Quantity
 Limit Switch  1
Stepper Driver -TMC2208 1
Stepper Driver-A4988 1
Fuse 1
3010- 3in1 Fan 1
Dual Extruder Gear 2
Rolling Bearing 2
Extruder Spring 2
PC4-01 Ppneumatic Coupler 1
KJH04-M6 Ppneumatic Coupler 1
Nozzle Kit 1
Nozzles 10
Build Plate 1
Filament Sensor Kit 1
V wheel+ Rolling Bearing 2

  • 【All Metal Frame & Quick Assembly】
  • 【Modular Design for Laser Engraving】
  • 【Dual-Color Printing】
  • 【Auto Bed Leveling】
Model SC-10 Shark
Print speed ≤200mm/s,Normal printing speed 45-90mm/s
Molding technology FDM
Nozzle diameter standard 0.4mm, can be changed to
0.3mm and 0.2mm
Number of nozzle 1
Nozzle temperature 260℃
Hot bed temperature 100℃
Print volume 235*235*265mm
Product size 443*466*488mm
Build plate size 250*250mm
Product Weight 8.4kg
Print speed ≤200mm/s,Normal printing speed 45-90mm/s
Printing accuracy ±0.1mm
Layer thickness 0.1-0.4mm
Documents supported STL、Obj、amf
Slicing software LOTMAXX,Cura,Repetier-Host,Simplyfy3D
Operating Voltage 100-120V / 200-240V
Machine power 290W
Filament diameter 1.75mm
Display 3.5-inch removable touch screen
Laser engraving

Equipped

Bicolor printing

Equipped

Auto leveling(3D Touch) Equipped
Rapid cooling Supported
Resume printing Supported
Full metal extruder Supported
Language 8 languages
Silent drive Supported
Number of extruders 2
Printing material PLA,ABS,TPU,Wood,copper-bearing,Gradient,etc.

 

 

FAQ

Filament does not stick on hotbed?

For newcomers, this is the most common problem. Do not worry, you can solve it easily. Generally, the distance between nozzle and platform is too far or near. So rotary the knob under the platform to adjust the distance between the nozzle and platform again, at a piece of A4 paper distance or less).

The display shows "Min temp"?

This happens for the following reasons: 1. The Thermistor port of nozzle is not plugged into the motherboard above or poor contact; 2. The Thermistor port of nozzle is broken, you need to replace the spare thermistor.

The display shows "MAX temp"?

This happens for the following reasons: 1. Thermistor port of nozzle screw is locked tightly, cause the temperature can not be sensing; 2.Thermistor port of nozzle is broken, you need to replace the spare thermistor.

Axis movement is not normal?

Please check axis lines and limit lines whether the one-to-one correspondence, whether loose. When you check the extruder motor, you must preheat nozzle over 185℃.

Circles not round, Lines not touching?

If the X/Y belt is loose, you can find circles are not round, Lines not touching when printing. Tighten all belts as far as possible.

 

$299.00

$700.00