$49.99
Note: 1. Only ship with LOTMAXX SC-10 SHARK. Not a single piece shipments. 2. Please choose the same color as your 3d printer. The unmatching color will be automatically modified...
Note: 1. Only ship with LOTMAXX SC-10 SHARK. Not a single piece shipments.
2. Please choose the same color as your 3d printer. The unmatching color will be automatically modified when shipping.
Just tap the touch screen to activate the auto-leveling interface, the inductive sensor will probe the heated bed. It precisely measures the print surface's tilt, freeing you from the time-consuming and tricky manual process.
Laser Engraving
No. |
Specification Name |
Parameter Description |
1 |
Laser irradiation distance(meters) |
>5000m |
2 |
Working time |
8000 hours (the module has 35% optical loss after focusing) |
3 |
Laser wavelength |
440-460nm |
4 |
Laser output power |
MAX: 1.6W |
5 |
Working voltage |
<6V, Standard: 4.8V |
6 |
Working current |
<1.5A, standard:1.2A |
7 |
TTL modulation |
Yes (make sure to input TTL level PWM closing signal) |
8 |
Analog switch |
Yes (there is a TTL/analog switch on the driver board) |
9 |
TTL signal |
0-5V input (0V OFF/5V ON) |
10 |
TTL control frequency |
0-20KHZ |
11 |
Duty Ratio |
Input 0-100% |
12 |
Cooling method: |
Metal radiator and silent fan |
13 |
Lens Material |
Glass |
14 |
Adjusting the focal length |
Manual adjustment,debugging focus <0.5mm |
15 |
Laser Size |
83*32*32mm |
16 |
Drive Board Size |
83*44*1.6mm |
17 |
Laser module size |
93*53*30mm |
No. |
Supporting engraving materials |
Not supporting engraving materials |
1 |
Wood |
Metal |
2 |
Gray cardboard |
Transparent material |
3 |
Opaque plastic |
|
4 |
Leather |
|
5 |
Paint PCBA |
|
6 |
Bamboo |
|
7 |
Black plastic |
|
8 |
Rubber |
Note: In addition to the above engraving materials, such as fibers, fabrics, etc., you can try to engrave.
Accessories |
Quantity |
450nm *1.6mW laser module with analog/TTL driver board |
1 |
Goggles |
1 |